首页 | 本学科首页   官方微博 | 高级检索  
     

膨胀干燥机橡胶熔体流动数值模拟分析
引用本文:吴显威,邓子龙,郭玉泉,罗琳. 膨胀干燥机橡胶熔体流动数值模拟分析[J]. 辽宁石油化工大学学报, 2018, 38(3): 79. DOI: 10.3969/j.issn.1672-6952.2018.03.015
作者姓名:吴显威  邓子龙  郭玉泉  罗琳
作者单位:(1.辽宁石油化工大学 机械工程学院,辽宁 抚顺113001;2.中国石油审计服务中心,北京100028)
摘    要:膨胀干燥机是橡胶后处理的重要设备,通过膨胀干燥机可脱去橡胶熔体中90%的水分。基于FLUENT软件,对橡胶熔体在膨胀干燥机流道中的流动进行数值分析,并根据速度分布云图及压力分布云图,分析橡胶熔体在流道中的流动规律。研究结果可为进一步研究工艺参数对橡胶质量的影响奠定基础。

关 键 词:膨胀干燥机  FLUENT  橡胶熔体  流动规律  
收稿时间:2017-05-04

Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer
Wu Xianwei,Deng Zilong,Guo Yuquan,Luo Lin. Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer[J]. Journal of Liaoning University of Petroleum & Chemical Technology, 2018, 38(3): 79. DOI: 10.3969/j.issn.1672-6952.2018.03.015
Authors:Wu Xianwei  Deng Zilong  Guo Yuquan  Luo Lin
Affiliation:(1.School of Mechanical Engineering,Liaoning Shihua University,Fushun Liaoning 113001,China;  2.China Petroleum and Audit Service Center,Beijing 100028,China)
Abstract:The expansion dryer was the critical equipment for the finishing unit of rubber plant. It could take off 90% moisture in the rubber melt. The flow behavior of rubber melts in the channel of the expansion dryer was analyzed by FLUENT. Observing the nephogram of the distribution of rubber melts speeds and stress nephogram, the flow rule of rubber melts in the expansion dryer was analyzed. The following research directions were indicated.
Keywords:The expansion dryer  FLUENT  Rubber melts  The flow rule  
本文献已被 CNKI 等数据库收录!
点击此处可从《辽宁石油化工大学学报》浏览原始摘要信息
点击此处可从《辽宁石油化工大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号