| 电动压下系统的局限 |
| |
| 引用本文： | 程会伦.电动压下系统的局限[J].铝加工,2002,25(5):39-41. |
| |
| 作者姓名： | 程会伦 |
| |
| 作者单位： | 西南铝业(集团)有限责任公司热连轧筹备处,重庆,401326 |
| |
| 摘 要： | 通过对电动压下局限性的研究，总结出了电动压下系统有三方面的不足，因此认为电动压下尽管是当今很好的轧辊辊径补偿系统和辊缝预设定系统，但不能作为轧制时的压下系统。
|
| 关 键 词： | 电动压下系统 轧制 效率 |
| 修稿时间： | 2002年1月12日 |
Limitation of the Electromechanical Screw down System |
| |
| CHENG Hui,lun.Limitation of the Electromechanical Screw down System[J].Aluminium Fabrication,2002,25(5):39-41. |
| |
| Authors: | CHENG Hui lun |
| |
| Abstract: | Through the study on the limitation of electrical screw down system,it is concluded that the electrical screw down system has three disadvantage .Even though it is currently regarded as a very good system for roll diameter compensation and roll gap presetting ,it is not suitable to be uesd as the screw down system for rolling. |
| |
| Keywords: | electromechanical srew down system system rolling efficiency |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
