| 橡胶增韧环氧树脂的增韧力学模型综述 |
| |
| 引用本文： | 孙振华,罗辉阳,赵世琦. 橡胶增韧环氧树脂的增韧力学模型综述[J]. 高分子材料科学与工程, 2001, 17(2): 1-4 |
| |
| 作者姓名： | 孙振华 罗辉阳 赵世琦 |
| |
| 作者单位： | 1. 清华大学工程力学系,
2. 清华大学工程化学工程系, |
| |
| 摘 要： | 对橡胶增韧环氧树脂的增韧机理模型进行了回顾，其主要增韧机理为局部部切屈服，孔洞或空穴的塑料性体积膨胀和橡胶颗粒桥联，在细观结构上采用典型轴对称单元的有限元分析来预测增韧环氧树脂的力学行为，断裂力学的J积分模型可用于估算增韧程序，基于断裂韧性GIC的增韧模型定量分析已取得一定进展。
|
| 关 键 词： | 环氧树脂 橡胶增韧 增韧机理 模型 有限元分析 |
| 文章编号： | 1000-7555(2001)02-0001-04 |
| 修稿时间： | 1999-05-12 |
A REVIEW OF TOUGHENING MECHANICS MODELS IN R UBBER-TOUGHENED EPOXY RESINS |
| |
| SUN Zhen-hua,LUO Hui-yang,ZHAO Shi-qi. A REVIEW OF TOUGHENING MECHANICS MODELS IN R UBBER-TOUGHENED EPOXY RESINS[J]. Polymer Materials Science & Engineering, 2001, 17(2): 1-4 |
| |
| Authors: | SUN Zhen-hua LUO Hui-yang ZHAO Shi-qi |
| |
| Abstract: | The model of toughening mechanisms of rubber toughened epoxy resins was reviewed. The main toughening mechanisms were verified as localized shear yielding, plastic growth of the viod or the hole and the rubber bridging mechanisms. The analysis of the finite element method using the axisymmetric model was employed to assess the mechanics behavior of the rubber toughening in mesostructure. The J integral model could evaluate the rubber toughening degree based on the fracture mechanics. The quantitative model based on the fracture toughness G IC had made some advances as well. |
| |
| Keywords: | epoxy resin rubber toughening toughening model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
