| 扁平电缆装配工艺设计技术与应用 |
| |
| 引用本文： | 徐英,赵锡钧,王宇.扁平电缆装配工艺设计技术与应用[J].电子工艺技术,2008,29(5). |
| |
| 作者姓名： | 徐英 赵锡钧 王宇 |
| |
| 作者单位： | 中国工程物理研究院电子工程研究所,四川,绵阳,621900 |
| |
| 摘 要： | 针对电子学系统小型化、高可靠性要求,采用扁平电缆传输高压脉冲大电流.介绍了扁平电缆和DG型插头的装配工艺、控制点.为了提高效率,保证扁平电缆剪形的一致性,设计了扁平电缆剪形模具,提出了设计要点.采用镀金扁平电缆,进行了工艺试验,结果满足要求,并通过生产的实际验证.工艺稳定性较好,产品合格率较高.
|
| 关 键 词： | 扁平电缆 装配工艺 模具 插头 |
Flat Cable Assemby Process Design Technique and Application |
| |
| XU Ying,ZHAO Xi-jun,WANG Yu.Flat Cable Assemby Process Design Technique and Application[J].Electronics Process Technology,2008,29(5). |
| |
| Authors: | XU Ying ZHAO Xi-jun WANG Yu |
| |
| Affiliation: | XU Ying,ZHAO Xi-jun,WANG Yu(The Institute of Electronic Engineering of CAEP,Mianyang 621900,China) |
| |
| Abstract: | According to small size,high-reliability requirements of electronics systems,use the flat cable to transmit high pressure pulse current.Introduce the assembly process and control points of flat cable and DG plug.In order to raise efficiency and shape uniformity of the flat cable cut,design cutting mould of flat cable,put forward the key points of design.Using the gold-plated flat cable,the process experiment is done,the result is satisfied with the requirements of production,the process stability is good,th... |
| |
| Keywords: | Flat cable Assembly process Mould Pulg |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
