基于B样条自由变形的个性化基台设计技术研究 |
| |
引用本文: | 谢鸟龙,;程筱胜,;戴宁,;汤春波. 基于B样条自由变形的个性化基台设计技术研究[J]. 机械设计与制造工程, 2012, 0(12): 17-20 |
| |
作者姓名: | 谢鸟龙, 程筱胜, 戴宁, 汤春波 |
| |
作者单位: | [1]南京航空航天大学机电学院,江苏南京210016; [2]南京医科大学口腔医学院,江苏南京210029 |
| |
基金项目: | 十二五国家科技支撑技术项目(2012BA107804);江苏省六大人才高峰项目(2010-WS081);江苏省卫生厅医学科研项目(H201034);南京航空航天大学科研基本业务费(NS2012010) |
| |
摘 要: | CAD技术应用于个性化基台的设计是口腔CAD/CAM系统的重要方向之一,研究了基于三次闭合均匀B样条自由变形的技术方法设计基台。首先利用基于Tailor级数的曲线细化方法生成B样条;然后基于参数化轮廓规则拉伸建模,形成基台的初始模型;最后通过实时地调整特征控制点进行基台的高度、角度以及颈缘线等局部变形。通过后槽牙的锥形基台设计应用实例证实研究算法的有效性、稳定性。
|
关 键 词: | 个性化基台 三次闭合均匀B样条 自由变形 |
Research on Technologies of Dental Abutment Customized Design Based on B Spline Free -Form Deformation |
| |
Affiliation: | XIE Niao - long', CHENG Xiao - sheng , DAI Ning', TANG Chun - bo (1. Nanjing University of Aeronautics and Astronautics, Jiangsu Nanjing, 210016, China) (2. Nanjing Medical University, Jiangsu Nanjing, 210029 , China) |
| |
Abstract: | The design of customized abutment based on CAD is one of the key steps of dental CAD/CAM. This paper presents a method based on cubic closed uniform B spline free -form deformation, proposes B spline based on Tailor series expansion, applies a regular extrusion modeling method based on parameterized contour to create the initial model of the abutment. So the angle height and cervical margins of the abutment are adjusted according to the charac- teristics control points. Some examples and the results show that the proposed algorithm is effective and feasible. |
| |
Keywords: | Customized Abutment Three Closed Uniform B Spline Free- form Deformation |
本文献已被 维普 等数据库收录! |
|