Effects of heat treatment on wear resistance and fracture toughness of duo-cast materials composed of high-chromium white cast iron and low-chromium steel |
| |
Authors: | Chang Kyu Kim Sunghak Lee Jae-Young Jung |
| |
Affiliation: | (1) the Center for Advanced Aerospace Materials, Pohang University of Science and Technology, 790-784 Pohang, Korea;(2) Center for Advanced Aerospace Materials, Pohang University of Science and Technology, Korea;(3) the Materials Science and Engineering Department, Pohang University of Science and Technology, Korea;(4) the New Materials and Components Research Center, Research Institute of Industrial Science and Technology, 790-330 Pohang, Korea |
| |
Abstract: | The objective of this study is to investigate effects of heat treatment on wear resistance and fracture toughness in duo-cast materials composed of a high-chromium white cast iron and a low-chromium steel as a wear-resistant part and a ductile part, respectively. Different size, volume fraction, and distribution of M7C3 carbides were employed in the wear-resistant part by changing the amount of chromium, and the volume fraction of martensite in the austenitic matrix was varied by the heat treatment. In the alloys containing a small amount of chromium, an interdendritic structure of eutectic M7C3 carbides was formed, and led to the improvement of wear resistance and fracture toughness. After the heat treatment, the selective wear of the matrix and the cracking or spalled-off carbides were considerably reduced since the hardness difference between carbides and matrix decreased by the increase in the matrix hardness, thereby leading to the improvement of the wear resistance. However, the fracture toughness of the heat-treated alloys was lower than that of the as-cast alloys because the matrix containing a considerable amount of martensite did not effectively prevent the crack propagation. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|