首页 | 本学科首页   官方微博 | 高级检索  
     

定向拉伸对PTFE/BaSO4复合材料性能和结构的影响
引用本文:高攀,寇开昌,张冬娜,史海林,卓龙海.定向拉伸对PTFE/BaSO4复合材料性能和结构的影响[J].中国塑料,2012,26(12):76-80.
作者姓名:高攀  寇开昌  张冬娜  史海林  卓龙海
作者单位:1. 西北工业大学理学院应用化学系2. 西北工业大学3. 西北工业大学理学院
摘    要:采用冷压和自由烧结工艺制备硫酸钡(BaSO4)填充聚四氟乙烯(PTFE)密封材料,并对其进行了拉伸处理。研究了不同拉伸倍率对PTFE/BaSO4复合材料的密度、压缩回复率的影响,并通过高温差示热分析仪和X射线衍射仪分析了拉伸处理对PTFE/BaSO4复合材料熔融结晶行为以及PTFE晶态结构的影响。结果表明,随着拉伸倍率的增加,PTFE/BaSO4复合材料的压缩率大幅提高,回复率降低,总体弹性回复率提高。拉伸处理对PTFE/BaSO4复合材料熔融结晶行为的影响不大,并且PTFE的晶型不变,随着拉伸倍率的增加,结晶度呈现先减小后增大的趋势。

收稿时间:2012-07-20

Effect of Oriented Drawing on Properties and Structure of BaSO4 Filled PTFE Composites
Abstract:Polytetrafluoroethylene (PTFE) sealing materials filled with BaSO4 were prepared via molding and sintering process. Effect of drawing ratio on the density, compressibility, and resilience were investigated. The melt crystallization behavior and crystallite structure were studied using DSC and XRD. Experimental results show that the density of PTFE/BaSO4 composites decreased, compressibility increased, while the resilience decreased, the overall compression recovery increased. Also with increasing draw ratio, the melt crystallization behavior of PTFE was little influenced, but the crystallinity increased after a first decrease.
Keywords:
点击此处可从《中国塑料》浏览原始摘要信息
点击此处可从《中国塑料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号