| 淬硬钢模具型腔高速加工的试验研究 |
| |
| 引用本文： | 潘建新,张导成,舒大松. 淬硬钢模具型腔高速加工的试验研究[J]. 工具技术, 2007, 41(12): 35-37 |
| |
| 作者姓名： | 潘建新 张导成 舒大松 |
| |
| 作者单位： | 湖南科技职业学院机电系,410118,长沙市;湖南网络工程职业学院 |
| |
| 基金项目： | 湖南省教育厅自然科学研究课题 |
| |
| 摘 要： | 通过整体硬质合金涂层球头立铣刀高速铣削淬硬钢(55HRC)旋钮模具型腔的单因素法切削试验,研究了不同的切削参数及其变化对模具型腔表面粗糙度的影响规律。
|
| 关 键 词： | 高速铣削 淬硬钢 表面粗糙度 |
| 收稿时间： | 2007-04-01 |
| 修稿时间： | 2007-04-01 |
Experimental Study on High-speed Milling Hardened Mould Cavity |
| |
| Pan Jianxin,Zhang Daocheng,Shu Dasong. Experimental Study on High-speed Milling Hardened Mould Cavity[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2007, 41(12): 35-37 |
| |
| Authors: | Pan Jianxin Zhang Daocheng Shu Dasong |
| |
| Abstract: | Based on the experiments with the Single Factor Method,in which the cavity of a knob hardened mould(55HRC)are cut by the coated-carbide end-mill in high-speed,the influence rules of different cutting parameters and their change on the surface roughness of the hardened mould cavity are studied. |
| |
| Keywords: | high-speed milling hardened steel surface roughness |
| 本文献已被 维普 万方数据 等数据库收录！ |
