首页 | 本学科首页   官方微博 | 高级检索  
     

声波测井仪器接收换能器隔声设计
引用本文:沈建国 富伟平. 声波测井仪器接收换能器隔声设计[J]. 石油仪器, 2005, 19(5): 8-10
作者姓名:沈建国 富伟平
作者单位:[1]天津大学药物科学与技术学院,天津 [2]吉林油田测井数控大队,吉林松源
基金项目:国家自然科学基金资助课题:批准号:50479070
摘    要:不论是阵列声波测井仪器还是普通声波测井仪器,发射与接收换能器之间的连接、接收换能器之间的连接,既要考虑机械结构的稳定性,更要考虑声波的隔声效果,以避免声波沿着连接部分传播。文章先给出一个实际的测井波形实例,引出隔声设计对声波测井资料的影响;然后,用一维声波传播模型给出了一种隔声设计方法。用该方法分析目前声波测井仪器所采用结构的隔声效果,发现在25kHz附近隔声效果比较差。为此,重新对连接方法进行了优化设计,新的阵列声波测井仪器研制中使用了这种隔声结构,在实际测井资料中收到了比较好的效果。

关 键 词:声波测井仪器 全波波形 隔声设计
文章编号:1004-9134(2005)05-0008-03
收稿时间:2005-07-04
修稿时间:2005-07-04

Sound insulation design for acoustic receivers in the sonic logging tool
Shen Jianguo and Fu Weiping.. Sound insulation design for acoustic receivers in the sonic logging tool[J]. Petroleum Instruments, 2005, 19(5): 8-10
Authors:Shen Jianguo and Fu Weiping.
Affiliation:Shen Jianguo and Fu Weiping.
Abstract:In this paper,an example is given to display the influnce of improper sound partitions on the sonic waveform logging data.With the help of 1D sound propagation model,some link constructions of the sonic logging tool are analyzed.Near the 25kHz,it is ineffective on obstructing the sound propagation.So some new constructions and link parts are designed.The best one is used in a new array sonic logging tool.Experimental results in Zhongyuan oilfield show that it works well.
Keywords:sonic loggig tool  waveforms  sound insulation design[KH*5/8D]  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号