首页 | 本学科首页   官方微博 | 高级检索  
     

稀土处理钢浇铸的工艺难点及对策
引用本文:唐向东,宋伟,杨会庭,陈天明,曾建华.稀土处理钢浇铸的工艺难点及对策[J].钢铁钒钛,2001,22(3):68-72.
作者姓名:唐向东  宋伟  杨会庭  陈天明  曾建华
作者单位:1. 攀钢提钒炼钢厂
2. 攀枝花钢铁研究院
摘    要:攀钢在浇铸稀土处理钢时,由于稀土氧化物对保护渣性能的影响,导致浇铸速度低,漏钢几率较高,铸坯表面质量差,严重影响该类钢种的生产与开发。通过对浇铸稀土处理钢工艺难点的分析,提出了加强连铸工艺控制,开发合适的结晶器保护渣等对策。

关 键 词:连铸  稀土处理钢  工艺控制  保护渣
文章编号:1004-7638(2001)03-0068-05
修稿时间:2001年6月5日

COUNTERMEASURE FOR THE PROBLEMS OF CONTINUOUS CASTING OF RE - TREATED STEELS
TANG Xiang-dong ,SONG Wei ,YANG Hui-ting ,CHEN Tian-ming ,ZENG Jian-hua BHDWGmm,WK,WKZQ,WKW.COUNTERMEASURE FOR THE PROBLEMS OF CONTINUOUS CASTING OF RE - TREATED STEELS[J].Iron Steel Vanadium Titanium,2001,22(3):68-72.
Authors:TANG Xiang-dong  SONG Wei  YANG Hui-ting  CHEN Tian-ming  ZENG Jian-hua [BHDWGmm  WK  WKZQ  WKW]
Affiliation:TANG Xiang-dong 1,SONG Wei 1,YANG Hui-ting 1,CHEN Tian-ming 2,ZENG Jian-hua 2[BHDWG8mm,WK2,WK42ZQ0,WK2W]
Abstract:While the RE-treated steels were cast at PZH Steel Co., the RE oxide (RE x O y ) had influence on the properties of mold powders,which brought about low casting speed,high breakout rate and poor slab surface quality and also had the harmful effects on production and development of these steels.The countermeasures for strengthening the control of continuous casting and developing the proper mold powders were put forward based on the analyses of the difficult points continuous casting of RE-treated steels.
Keywords:continuous casting  RE  treated steel  process control  mold powder
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号