| 高压平盖的设计方法 |
| |
| 引用本文： | 李疆英,李永生. 高压平盖的设计方法[J]. 石油化工设备, 2006, 35(6): 39-41 |
| |
| 作者姓名： | 李疆英 李永生 |
| |
| 作者单位： | 西安长庆科技工程公司,陕西,西安,710021 |
| |
| 摘 要： | 阐述了高压平盖的两种设计方法,即ASME法和巴赫法的特点和不同,通过比较和分析阐明了其各自的适用范围。
|
| 关 键 词： | 高压容器 平盖 厚度 设计 |
| 文章编号： | 1000-7466(2006)06-0039-03 |
| 修稿时间： | 2006-05-30 |
Design Methods of High Pressure Flat Cover |
| |
| LI Jiang-ying,LI Yong-sheng. Design Methods of High Pressure Flat Cover[J]. Petro-Chemical Equipment, 2006, 35(6): 39-41 |
| |
| Authors: | LI Jiang-ying LI Yong-sheng |
| |
| Abstract: | Two typical high pressure flat cover methods including ASME process and Bach process are described.The characteristics of these two methods and the differences among them are mainly discussed.By comparing and analyzing,the scopes of application of them are clarified respectively. |
| |
| Keywords: | high pressure vessel flat cover thickness design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
