| MATLAB在注塑件翘曲变形工艺参数优化中的应用 |
| |
| 引用本文： | 杨守平. MATLAB在注塑件翘曲变形工艺参数优化中的应用[J]. 现代机械, 2007, 0(3): 64-65,68 |
| |
| 作者姓名： | 杨守平 |
| |
| 作者单位： | 杭州职业技术学院,机电系,浙江,杭州,311112 |
| |
| 摘 要： | 本文利用BP神经网络对注塑工艺参数及其相对应的翘曲变形量样本进行训练,得到了描述工艺参数到翘曲量映射关系的ANN模型,并且验证了此模型的准确性,得出了工艺参数与塑件注塑翘曲变形量的内在联系。
|
| 关 键 词： | 注塑成型 翘曲变形 工艺参数 正交试验 神经网络 |
| 文章编号： | 1002-6886（2007）03-0064-03 |
| 修稿时间： | 2007-01-25 |
Application of MATLAB in Optimization of Process Parameters and Warp Distortion of Plastic Parts |
| |
| YANG Shou-ping. Application of MATLAB in Optimization of Process Parameters and Warp Distortion of Plastic Parts[J]. Modern Machinery, 2007, 0(3): 64-65,68 |
| |
| Authors: | YANG Shou-ping |
| |
| Affiliation: | YANG Shou-ping |
| |
| Abstract: | Non-linear relationship between the injection process parameters and the degree of warp distortion is established through the neural network which is testified by the test samples. Optimization of process parameters based on the neural network and orthogonal test is carried out. So the internal links of process parameters and the degree of warp distortion is found . |
| |
| Keywords: | injection molding warp distortion process parametric orthogonal table artificial neural network(ANN) |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
