| M形热成形零件模具冷却系统设计与分析 |
| |
| 引用本文： | 赵宁,李晓刚,章军,黄鸣东.M形热成形零件模具冷却系统设计与分析[J].模具工业,2014(10):29-35. |
| |
| 作者姓名： | 赵宁 李晓刚 章军 黄鸣东 |
| |
| 作者单位： | 1. 首钢技术研究院 用户技术研究所,北京,100043
2. 北京科技大学 机械工程学院,北京,100083 |
| |
| 摘 要： | 介绍了汽车用典型M形热成形零件模具冷却系统的设计,利用仿真软件模拟分析不同冷却参数对热成形模具的冷却效果,以连续冲压20个周期为研究对象,讨论无冷却系统、冷却水为层流流动和紊流流动状态下模具温度的变化规律,为热成形模具冷却系统设计提供理论依据。
|
| 关 键 词： | 热成形模具 冷却系统 仿真分析 温度 |
Design and analysis of cooling system of hot forming die for M-shaped part |
| |
| ZHAO Ning,LI Xiao-gang,ZHANG Jun,HUANG Ming-dong.Design and analysis of cooling system of hot forming die for M-shaped part[J].Die & Mould Industry,2014(10):29-35. |
| |
| Authors: | ZHAO Ning LI Xiao-gang ZHANG Jun HUANG Ming-dong |
| |
| Affiliation: | ZHAO Ning, LI Xiao-gang, ZHANG Jun, HUANG Ming-dong (1.Institute of Technology for Users, Shougang Technology Institute, Beijing 100043, China; 2.School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China) |
| |
| Abstract: | The cooling system design of a hot forming die for an automotive typical M-shaped part was presented. And the cooling effects of various cooling parameters on the die were studied by simulation software. With continuous stamping for 20 cycles as re- search object, the variation rules of the die temperature under conditions of without cooling system, with laminar flow or turbulent flow cooling water were discussed. |
| |
| Keywords: | hot forming die cooling system simulation analysis temperature |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
