| 塑料反射器注射模设计 |
| |
| 引用本文： | 黄克荣. 塑料反射器注射模设计[J]. 模具工业, 2014, 0(10): 51-54 |
| |
| 作者姓名： | 黄克荣 |
| |
| 作者单位： | 百家丽 中国 照明电器有限公司,江苏 仪征,211400 |
| |
| 摘 要： | 分析了塑料反射器的结构与成型工艺,并对其不合理的结构部分进行了改进。明确了模具设计的重点,分析了2种模具设计方案。详细介绍了模具分型面、浇注系统和冷却系统设计,经试模和批量生产验证,模具结构设计合理,塑件成型质量好,成品率高。
|
| 关 键 词： | 注射模 分型面 浇注系统 冷却 反射器 |
Design of injection mould for plastic reflector |
| |
| HUANG Ke-rong. Design of injection mould for plastic reflector[J]. Die & Mould Industry, 2014, 0(10): 51-54 |
| |
| Authors: | HUANG Ke-rong |
| |
| Affiliation: | HUANG Ke-rong (Beghelli China Co., Ltd., Yizheng, Jiangsu 211400, China) |
| |
| Abstract: | Some unreasonable structure of a lamp reflector was improved based on analysis of the structure and moulding process of the product. The key design points were decided and two mould design schemes were analyzed. The design of parting line, feeding system and cooling system of the injection mould was presented in details. |
| |
| Keywords: | injection mould parting line feeding system cooling reflector |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
