| 平整机延伸率设定的研究 |
| |
| 引用本文： | 白振华,李兴东,连家创,曾长操.平整机延伸率设定的研究[J].冶金设备,2005(1):25-26. |
| |
| 作者姓名： | 白振华 李兴东 连家创 曾长操 |
| |
| 作者单位： | 1. 燕山大学机械工程学院,秦皇岛,066004
2. 上海交通大学,上海,200030 |
| |
| 摘 要： | 从消除来料板形缺陷的角度,讨论了平整机延伸率的设定问题,给出了消除来料板形缺陷所需要 的最小延伸率的计算模型,对于指导现场延伸率的设定,具有重要的理论价值和实际意义。
|
| 关 键 词： | 板形缺陷 平整 延伸率设定 |
| 修稿时间： | 2004年9月15日 |
Research About the Set of the Elongation Percentage of Planishing Mill |
| |
| Bai Zhenhua,Li Xingdong,Lian Jiachuang,Zeng Changcao.Research About the Set of the Elongation Percentage of Planishing Mill[J].Metallurgical Equipment,2005(1):25-26. |
| |
| Authors: | Bai Zhenhua Li Xingdong Lian Jiachuang Zeng Changcao |
| |
| Abstract: | From the point of eliminating the shape flaw, the set of the elongation percentage of the planishing mill is discussed, and the computing model of the least elongation percentage for eliminating the shape flaw of incoming strip is brought forward. For guiding the field elongation set, it achieves significant theoretical value and practical meaning. |
| |
| Keywords: | Shape flaw Planish Set of elongation percentage |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
