New approach in depositing thick, layered cubic boron nitride coatings by oxygen addition—structural and compositional analysis

Cubic boron nitride (c-BN) can be produced by PVD and PA-CVD techniques by intensive ion bombardment leading to highly stressed films limiting its use in industrial applications. Various attempts have been undertaken to reduce the compressive stress of c-BN thin films. A significant reduction in compressive stress and a substantially improved adhesion was achieved by a new coating concept consisting of a two-step adhesion-promoting base layer, a compositional-graded nucleation layer obtained by a stepwise decrease of the oxygen content in the Ar/N₂/O₂ atmosphere and a low-stressed c-BN:O top layer with controlled oxygen addition. The four-layer c-BN:O film with a thickness of 3 μm was deposited by unbalanced radio frequency magnetron sputtering of a hot-pressed hexagonal boron nitride target on silicon substrates. The adhesion layer was deposited in a mixed Ar/O₂ atmosphere of 0.26 Pa with a stepwise increased nitrogen gas flow and a subsequent increase of the ion energy by increasing the substrate bias from 0 to − 250 V. The c-BN nucleation was gradually initiated by decreasing the O₂ gas flow. The present study was focused on the investigation of the morphology, the microstructure on the nanoscale, and the bonding structure using scanning electron microscopy (SEM), Fourier-Transmission infra-red spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM) and electron energy loss spectroscopy (EELS) employing analytical scanning transmission electron microscopy (ASTEM). The HRTEM images revealed a four-layer coating consisting of a gradual nucleation of t-BN, on which a gradual nucleation of c-BN was achieved by decreasing the oxygen gas flow.