首页 | 本学科首页   官方微博 | 高级检索  
     

进气道和燃烧室形状对大缸径天然气发动机缸内流动和燃烧的影响
引用本文:罗坤,黄勇成,朱赞,董伟. 进气道和燃烧室形状对大缸径天然气发动机缸内流动和燃烧的影响[J]. 内燃机工程, 2021, 42(2): 64-71
作者姓名:罗坤  黄勇成  朱赞  董伟
作者单位:西安交通大学能源与动力工程学院,西安710049;广西玉柴机器股份有限公司,玉林537005
基金项目:国家重点研发计划资助项目(2018YFB0105900)
摘    要:为了提升采用当量燃烧的大缸径天然气发动机的指示热效率,提出了组织弱涡流、强滚流、高湍流强度的缸内气流运动的理念,据此设计了不同形状的进气道和燃烧室,并采用三维数值模拟的方法研究了进气道和燃烧室形状对缸内流动和燃烧的影响.研究发现:与原机相比,当将原螺旋进气道改为直进气道并配合原缩口型、新的直口型、敞口型和半球型燃烧室时...

关 键 词:天然气发动机  当量燃烧  进气道结构  燃烧室形状  数值模拟
收稿时间:2020-06-14
修稿时间:2021-03-05

Influence of Intake Port and Combustion Chamber Shapes on In-Cylinder Flow and Combustion of Large-Bore Natural Gas Engines
LUO Kun,HUANG Yongcheng,ZHU Zan,DONG Wei. Influence of Intake Port and Combustion Chamber Shapes on In-Cylinder Flow and Combustion of Large-Bore Natural Gas Engines[J]. Chinese Internal Combustion Engine Engineering, 2021, 42(2): 64-71
Authors:LUO Kun  HUANG Yongcheng  ZHU Zan  DONG Wei
Affiliation:(School of Energy and Power Engineering,Xian Jiaotong University,Xi'an 710049,China;Guangxi Yuchai Machinery Co.,Ltd.,Yulin537005,China)
Abstract:In order to improve the indicated thermal efficiency of a large bore natural gas engine with stoichiometric operation, a concept of organizing an in-cylinder air motion with weaker swirl, stronger tumble and higher turbulence intensity was proposed. According to this concept, different shapes of intake ports and combustion chambers were designed. Then, the effects of the shape of the intake port and combustion chamber on the in-cylinder flow and combustion were studied using three-dimensional numerical simulation. In comparison with the original engine, when changing the original helical intake port to a straight intake port and adopting the original reentrant combustion chamber and a new vertical-cave, open-cave, and hemispherical-cave combustion chamber in turn, the in-cylinder swirl flow was significantly weakened, and the tumble flow was obviously enhanced. Especially, the maximum tumble flow ratio during the compression stroke could reach 0.76, 0.83, 1.03 and 1.71, respectively, and the in-cylinder average turbulent kinetic energy at the ignition timing was increased by 35.27%, 36.26%, 50.33%, and 135.99%, respectively, further accelerating the combustion rate and increasing the indicated thermal efficiency. Therefore, the match of the hemispherical-cave combustion chamber with the straight intake port was more beneficial to the formation of a stronger in-cylinder tumble flow and the improvement of turbulence intensity at the ignition timing. Finally, the indicated thermal efficiency was increased from 39.51% of the original engine to 42.14%.
Keywords:natural gas engine   stoichiometric operation   intake port geometry   combustion chamber shape   numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《内燃机工程》浏览原始摘要信息
点击此处可从《内燃机工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号