首页 | 本学科首页   官方微博 | 高级检索  
     

模拟离子源注入型IH加速器研制进展
引用本文:赵良超,石金水,何小中,庞 健,马超凡.模拟离子源注入型IH加速器研制进展[J].太赫兹科学与电子信息学报,2021,19(1):166-169.
作者姓名:赵良超  石金水  何小中  庞 健  马超凡
作者单位:Institute of Fluid Physics,China Academy of Engineering Physics,Mianyang Sichuan 621999,China
摘    要:离子源注入型交叉手指型横电模(IH)加速器有望发展成为一种紧凑的、低功耗的离子加速器.中国工程物理研究院流体物理研究所研制了一台将质子束从0.04 MeV加速到2.0 MeV的离子源注入型IH加速器,目前已经完成了该加速器的设计加工和束测平台搭建,并进行了初步的束流测试试验.实测束流传输效率为32.77%.束流实验结果...

关 键 词:离子源注入型  IH加速腔  交变相位聚焦  低能加速器
收稿时间:2019/10/20 0:00:00
修稿时间:2019/11/27 0:00:00

Development of ion source injected IH mode Linac
ZHAO Liangchao,SHI Jinshui,HE Xiaozhong,PANG Jian,MA Chaofan.Development of ion source injected IH mode Linac[J].Journal of Terahertz Science and Electronic Information Technology,2021,19(1):166-169.
Authors:ZHAO Liangchao  SHI Jinshui  HE Xiaozhong  PANG Jian  MA Chaofan
Abstract:Ion source injected Interdigital H(IH) mode Linac has great potential to accelerate high current particle beam with high efficiency and low power consumption. One prototype of this accelerator was developed by Institute of Fluid Physics, China Academy of Engineering Physics. This accelerator was designed to accelerate protons from 0.04 MeV to 2.0 MeV with an IH cavity. The accelerator now has been constructed and tested. Beam test results show that the transmission is about 32.77%, and all parameters are consistent with the designed values, which proves the effectiveness and feasibility of this kind of accelerator.
Keywords:
点击此处可从《太赫兹科学与电子信息学报》浏览原始摘要信息
点击此处可从《太赫兹科学与电子信息学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号