Characterization of high molecular weight disinfection byproducts resulting from chlorination of aquatic humic substances

Aquatic humic substances react with chlorine to produce numerous disinfection byproducts (DBPs) during chlorination of drinking water. Although low molecular weight (MW) chlorinated DBPs have been intensively studied over the past several decades, relatively little is known about high MW chlorinated DBPs (above 500 Da) that may be associated with adverse health implications. In this work, carrier-free radioactive 36Cl was introduced into a Suwannee River fulvic acid sample to label the chlorine-containing DBPs. By combining the fractionation techniques of ultrafiltration (UF) and size exclusion chromatography (SEC) with the detection of 36Cl, UV, and dissolved organic carbon (DOC), the high MW region in the SEC-36Cl profiles of the chlorinated sample with and without UF was defined. SEC-UV and SEC-DOC profiles were found to be approximately indicative of SEC-36Cl profiles for the high MW region. The MW distribution shows that the high MW chlorinated DBPs were highly dispersed with an average MW around 2000 Da based on calibration with polystyrene sulfonate standards. The Cl/C atomic ratios of the high MW DBPs were roughly constant (0.025), which is much lower than those of the common known chlorinated DBPs.