首页 | 本学科首页   官方微博 | 高级检索  
     

典型特高压钢管塔抗震能力研究
引用本文:丁志敏,龙春晖,杨诚,陈舸,李明华,杨宏. 典型特高压钢管塔抗震能力研究[J]. 电气开关, 2020, 0(3): 42-45
作者姓名:丁志敏  龙春晖  杨诚  陈舸  李明华  杨宏
作者单位:贵州电网有限责任公司凯里供电局
摘    要:为分析典型特高压钢管塔的抗震能力,利用有限元软件ANSYS建立了7种不同呼高的典型特高压交流直线塔的有限元模型,并采用三角级数迭加法模拟了典型地震烈度和场地组合下的地震动加速度时程,对典型直线型单基杆塔进行了地震动反应谱分析,结果表明:1000kV典型特高压钢管塔在典型地震烈度和场地组合条件下具有足够的抗震能力。

关 键 词:特高压钢管塔  三维建模  三角级数迭加法  地震烈度  时程分析

Research on Shock Resistance of the Typical UHV Stell-tube Tower
DING Zhi-min,LNG Chun-hui,YANG Cheng,CHEN Ge,LI Ming-hua,YANG Hong. Research on Shock Resistance of the Typical UHV Stell-tube Tower[J]. Electric Switchgear, 2020, 0(3): 42-45
Authors:DING Zhi-min  LNG Chun-hui  YANG Cheng  CHEN Ge  LI Ming-hua  YANG Hong
Affiliation:(Guizhou Kaili Power Supply Bureau of Power Grid Co.Ltd.,Kaili 556000,China)
Abstract:In order to analyze the seismic capacity of typical UHV steel tube tower,this paper uses the finite element software ANSYS to establish seven different call high typical UHV linear finite element model of the tower,and uses trigonometric series overlapping addition to simulate the typical earthquake intensity and acceleration time history under the combination of ground motions,the typical linear single-base tower on the seismic response spectrum analysis,the results show that the typical 1000kV UHV pole tower in a typical earthquake intensity and site conditions have enough aseismic ability.
Keywords:UHV steel tube tower  three-dimensional modeling  trigonometric series superposition  seismic intensity  time history analysis
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号