首页 | 本学科首页   官方微博 | 高级检索  
     

硅离子注入聚合物摩擦特性研究
引用本文:吴瑜光,张通和,张旭,刘安东,谢孟峡,张爱民,陈建敏.硅离子注入聚合物摩擦特性研究[J].核技术,2002,25(12):1007-1012.
作者姓名:吴瑜光  张通和  张旭  刘安东  谢孟峡  张爱民  陈建敏
作者单位:1. 北京师范大学射线束技术和材料改性教育部重点实验室,低能核物理所,北京,100875
2. 北京师范大学分析测试中心,北京,100875
3. 中国科学院兰州化学物理研究所固体滑润开放实验室,兰州,730000
基金项目:国家自然科学基金项目 (5 0 14 10 2 2 ),国家“八六三”计划项目 (2 0 0 1AA380 2 0 )资助
摘    要:采用金属蒸汽真空弧(MEVVA)离子注入机引出的Si离子进行了聚酯薄膜(PET)改性研究,注入后的聚酯膜表面结构发生了很大的变化。用透射电子显微镜观察了注入聚酯膜的横截面,结果表明,在注入层形成颗粒的沉积。红外吸收测量揭示这些颗粒为SiC和富集的碳颗粒。这些颗粒增强了注入层表面强化效果。用纳米硬度计测量显示,Si离子注入可明显地提高聚酯膜表面硬度和杨氏模量,从而极大地的增强了表面抗磨损特性。最后讨论了Si离子注入聚酯膜改善特性的机理。

关 键 词:硅离子注入  摩擦特性  表面强化机理  聚合物  改性
修稿时间:2000年12月13

Properties of tribology for Si implanted PET
WU Yuguang,ZHANG Tonghe,ZHANG Xu,LIU Andong.Properties of tribology for Si implanted PET[J].Nuclear Techniques,2002,25(12):1007-1012.
Authors:WU Yuguang  ZHANG Tonghe  ZHANG Xu  LIU Andong
Abstract:Polyethylene terephthalane (PET) has been modified with Si ions from a metal vapor arc source (MEVVA). After implantation, the surface structure has been greatly changed. The experimental results of infrared absorption indicated that the particles are referred to rich carbon and SiC particles. The PET has been strengthened by these dispersed particles. The measurement results using nanometer hardness tester reveal that both surface hardness and modulus increase obviously. Therefore the surface wear resistance improved extremely. Finally the modification mechanism of Si implanted PET was discussed.
Keywords:Si ion implantation  Tribological properties  Surface strengthening mechanism  Polymer
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号