| 精磨高硬脆材料表面形貌分析及工具浓度的选择 |
| |
| 引用本文： | 刘志环,王进保,肖乐银. 精磨高硬脆材料表面形貌分析及工具浓度的选择[J]. 珠宝科技, 2010, 0(5): 12-17 |
| |
| 作者姓名： | 刘志环 王进保 肖乐银 |
| |
| 作者单位： | 桂林矿产地质研究院,广西桂林541004 |
| |
| 摘 要： | 文章对比了不同浓度的W40、W12、W7等粒度金刚石砂带精磨玛瑙时的工件表面形貌参数、以及达到最佳粗糙度所需的磨削时间。实验结果表明,W40砂带金刚石浓度应选择13.5%～16%（vol%）,W14砂带金刚石浓度应选择11%～13.5%,W7砂带金刚石浓度应选择≤11%。
|
| 关 键 词： | 金刚石砂带 金刚石浓度 精磨 |
Analysis on Surface Morphology of precision grinding high hard and brittle material and selection of diamond concentration |
| |
| LIU Zhi-huan,WANG Jin-bao,XIAO Le-yin. Analysis on Surface Morphology of precision grinding high hard and brittle material and selection of diamond concentration[J]. Jewellery Science and Technology, 2010, 0(5): 12-17 |
| |
| Authors: | LIU Zhi-huan WANG Jin-bao XIAO Le-yin |
| |
| Affiliation: | (Guilin Research Institute of Geology for Mineral Resources,Guilin 541004) |
| |
| Abstract: | In this paper,the paprameters of workpiece surface were compared when processing agate using diamond belt with different concentration and grain size of diamond,and the grinding time was needed to get the best roungress.The results indicate that the concentration of diamond belt with grain size W40,W14,W7 should be at 13.5～16%（vol%）,11～13.5% and below 11% respectively. |
| |
| Keywords: | diamond belt diamond concentration precision grinding |
| 本文献已被 维普 等数据库收录！ |
|
