| 安钢150t转炉托圈制造工艺浅析 |
| |
| 引用本文： | 连和平,张明,王新志,向文强,于海涛. 安钢150t转炉托圈制造工艺浅析[J]. 重型机械, 2010, 0(1): 55-57 |
| |
| 作者姓名： | 连和平 张明 王新志 向文强 于海涛 |
| |
| 作者单位： | 1. 安阳钢铁股份有限责任公司,第二炼轧厂,河南,安阳,455004
2. 中国重型机械研究院有限公司,陕西,西安,710032 |
| |
| 摘 要： | 针对转炉托圈体积大、重量达168 t、加工制造与运输困难的问题,采用托圈分四瓣分别加工进而组装焊接的新制造工艺。对加工后转炉托圈进行检测,耳轴的同轴度与直径偏差符合工艺要求,超声波探伤结果表明焊缝质量符合国家标准。
|
| 关 键 词： | 转炉托圈 剖分式 制造工艺 |
Fabrication technology analysis of Angang 150t converter trunnion ring |
| |
| LIAN He-ping,ZHANG Ming,WANG Xin-zhi,XIANG Wen-qiang,YU Hai-tao. Fabrication technology analysis of Angang 150t converter trunnion ring[J]. Heavy Machinery, 2010, 0(1): 55-57 |
| |
| Authors: | LIAN He-ping ZHANG Ming WANG Xin-zhi XIANG Wen-qiang YU Hai-tao |
| |
| Affiliation: | LIAN He-ping1,ZHANG Ming2,WANG Xin-zhi1,XIANG Wen-qiang1,YU Hai-tao1(1.Anyang Iron & Steel Stock Co.,Ltd.,Anyang 455004,China,2.China Heavy Machine Research Institute Co.,Xi'an 710032,China) |
| |
| Abstract: | For the deficiencies of the 150 t converter trunnion ring being bulky,heavy(reaching 168 t),and difficult to fabricate and transport,the new fabrication technology that divided the trunnion ring into four parts and then assembled them by soldering after processing has been adopted.Examination of the fabricated converter trunnion ring showed that the coaxiality and diameter deviation of the trunnion met the technological requirements,and ultrasonic inspection indicated that the welding quality complied with ... |
| |
| Keywords: | converter trunnion ring cutting-in-half type fabrication technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
