首页 | 本学科首页   官方微博 | 高级检索  
     

W-20%Cu纳米复合粉的制备
引用本文:杨明川,宋贞桢,卢柯.W-20%Cu纳米复合粉的制备[J].金属学报,2004,40(6):639-642.
作者姓名:杨明川  宋贞桢  卢柯
作者单位:1. 中国科学院金属研究所沈阳材料科学国家(联合)实验室,沈阳,110016
2. 中国科学院金属研究所沈阳材料科学国家(联合)实验室,沈阳,110016;北京科技大学材料科学与工程学院,北京,100083
基金项目:沈阳市科技计划资助项目03017
摘    要:采用雾化干燥结合氢还原工艺制备W-20%Cu(质量分数)纳米复合粉,分别用XRD,SEM,TEM等手段表征了制备过程中各步骤的产物及最终复合粉,结果表明该复合粉的粒子平均尺寸为240nm,粒子中弥散均匀分布的钨晶粒平均尺寸约为16nm。

关 键 词:钨铜  纳米粉末  雾化干燥
文章编号:0412-1961(2004)06-0639-04
收稿时间:2003-03-17
修稿时间:2003-05-27

Synthesis of W--20%Cu Nanocomposite Powders
YANG Mingchuan,SONG Zhenzhen,LU Ke.Synthesis of W--20%Cu Nanocomposite Powders[J].Acta Metallurgica Sinica,2004,40(6):639-642.
Authors:YANG Mingchuan  SONG Zhenzhen  LU Ke
Affiliation:Shenyang National Laboratory for Materials Science, Institute of Metal Research, The ChineseAcademy of Sciences, Shenyang 110016
Abstract:W--20%Cu (mass fraction) nanocomposite powders were synthesized by means of combining spray drying and hydrogen reduction process. The composite powders were characterized by using XRD, SEM, TEM. It has been shown that tungsten and copper are homogenously mixed within each particle and the average particle size is about 240 nm, in which the tungsten particles have an average grain size of 16 nm.
Keywords:tungsten-copper  nano-powders  spray drying
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号