| 数值模拟在消除球墨铸铁差速器壳缩孔中的应用 |
| |
| 引用本文： | 钱怡君,于浩,程兆虎.数值模拟在消除球墨铸铁差速器壳缩孔中的应用[J].中国铸造装备与技术,2011(6). |
| |
| 作者姓名： | 钱怡君 于浩 程兆虎 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院,安徽合肥,230009 |
| |
| 摘 要： | 首先对汽车差速器壳进行合理的铸造工艺方案设计,然后利用华铸CAE软件对球墨铸铁差速器壳的充型及凝固过程进行数值模拟.基于模拟结果,预测和分析在此工艺方案下铸件产生缩孔的倾向和形成原因,进而提出冒口补缩系统的优化方案,成功消除了差速器壳铸造过程中产生的缩孔缺陷.结果表明:利用CAE计算机模拟技术有助于为工艺方案的评估与优化提供可靠的借鉴,缩短了产品试制周期,降低废品率,保证了铸件质量.
|
| 关 键 词： | 差速器壳 铸造工艺 CAE 球墨铸铁 数值模拟 缩孔 |
Application of Numerical Simulation on Eliminating Shrinkage Cavity of Ductile Iron Differential Case |
| |
| QIAN YiJun,YU Hao,CHENG ZhaoHu.Application of Numerical Simulation on Eliminating Shrinkage Cavity of Ductile Iron Differential Case[J].China Foundry Machinery & Technology,2011(6). |
| |
| Authors: | QIAN YiJun YU Hao CHENG ZhaoHu |
| |
| Affiliation: | QIAN YiJun,YU Hao,CHENG ZhaoHu (School of Material Science and Engineering Hefei University of Technology,Hefei 230009,Anhui China) |
| |
| Abstract: | A casting process of car differential case has been designed before InteCAST software was used for numerical simulation of the mould filling process and solidification process of ductile iron differential case.Based on simulation results,the tendency and cause of formation of shrinkage cavity in castings under this program have been forecasted and analyzed then the optimization program of riser feeding system was made,which was successful in eliminating the shrinkage defects which were generated during the ... |
| |
| Keywords: | Differential case Foundry technology CAE Ductile iron Numerical simulation Shrinkage cavity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
