| 内设三层纵向支撑面的立体织物的织制 |
| |
| 引用本文： | 刘海文,谷剑锋,阎若思,梁运兴,常峪萄. 内设三层纵向支撑面的立体织物的织制[J]. 产业用纺织品, 2011, 29(2): 5-7 |
| |
| 作者姓名： | 刘海文 谷剑锋 阎若思 梁运兴 常峪萄 |
| |
| 作者单位： | 河北科技大学纺织服装学院,石家庄,050031;河北科技大学纺织服装学院,石家庄,050031;河北科技大学纺织服装学院,石家庄,050031;河北科技大学纺织服装学院,石家庄,050031;河北科技大学纺织服装学院,石家庄,050031 |
| |
| 摘 要： | 通过压扁法设计内设三层纵向支撑面的立体织物,并采用普通的多臂开口小样机织造.该织物可以采用玻璃纤维等特种纤维织造,然后与树脂复合,制成有一定承重力的三维型材;也可以采用化纤织造,通过热黏合或其他方法制成多用途的三维型材.
|
| 关 键 词： | 内设三层纵向支撑面立体织物 预成型件 压扁法 投梭路径 织造工艺 |
Weaving of internal three layers vertical support surface three-dimensional fabric |
| |
| Liu Haiwen,Gu Jianfeng,Yan Ruosi,Liang Yunxing,Chang Yutao. Weaving of internal three layers vertical support surface three-dimensional fabric[J]. Technical Textiles, 2011, 29(2): 5-7 |
| |
| Authors: | Liu Haiwen Gu Jianfeng Yan Ruosi Liang Yunxing Chang Yutao |
| |
| Affiliation: | Liu Haiwen,Gu Jianfeng,Yan Ruosi,Liang Yunxing and Chang Yutao(College of Textile and Garment,Hebei University of Science and Technology) |
| |
| Abstract: | The internal three layers vertical support surface three-dimensional fabric was woven by method of flattening and used an ordinary sample dobby loom prototype.This fabric can be woven using special fiber such as fiberglass and compounded with resin to became three-dimensional preforms.It also canbe woven with chemical fibre,and by thermal bonding or other methods became three-dimensional reforms. |
| |
| Keywords: | internal threelayers vertical support surface three-dimensional fabric preform press-flet method picking route weaving process |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
