| Ni3Al金属间化合物多孔材料的制备及抗腐蚀性能 |
| |
| 引用本文： | 吴靓,董虹星,贺跃辉. Ni3Al金属间化合物多孔材料的制备及抗腐蚀性能[J]. 材料研究学报, 2011, 0(2): 118-123 |
| |
| 作者姓名： | 吴靓 董虹星 贺跃辉 |
| |
| 作者单位： | 中南大学粉末冶金国家重点实验室; |
| |
| 基金项目： | 国家自然科学杰出青年基金50285102; 国家自然科学基金Nos.20636020 & 50721003; 国家重大基础研究发展计划2009CB623406资助项目~~ |
| |
| 摘 要： | 使用粉末冶金模压成形和无压反应烧结方法制备出Ni3Al金属间化合物多孔材料,研究了反应过程中Ni3Al金属间化合物多孔材料的体积膨胀、孔结构参数、组织形貌,以及在KOH溶液中的抗腐蚀性能.结果表明:烧结后Ni3Al金属间化合物多孔材料发生了显著膨胀,最大孔径和开孔隙度都随着温度的升高而升高,当温度到达750℃时体积膨胀...
|
| 关 键 词： | 金属材料 Ni3Al金属间化合物 多孔材料 Kirkendall效应 抗碱腐蚀性能 |
Preparation and Corrosion Resistance in KOH Solution of Porous Ni_3Al Intermetallics |
| |
| WU Liang Dong Hongxing HE Yuehui. Preparation and Corrosion Resistance in KOH Solution of Porous Ni_3Al Intermetallics[J]. Chinese Journal of Materials Research, 2011, 0(2): 118-123 |
| |
| Authors: | WU Liang Dong Hongxing HE Yuehui |
| |
| Affiliation: | WU Liang Dong Hongxing HE Yuehui~(**) (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083) |
| |
| Abstract: | Porous Ni3Al alloys were fabricated by cold pressing and pressureless sintering of Ni/Al elemental powder mixtures.The swelling behavior,pore structure parameters and microstructure of porous Ni3Al during synthesis procedure have been systematically investigated.The results show that swelling effect take place after sintering.The maximum pore size and open porosity increase with increasing of temperature,but when temperature exceeds 750℃the swelling begins to suppress and the maximum pore size begins to decrease.The prime reason of the pore formation can be attributed to the Kirkendall effect in the process of reactive synthesis.The corrosion potential of porous Ni3Al in KOH solution is more positive than the other two porous compacts,and its weight is stable. |
| |
| Keywords: | metallic materials Ni_3AI intermetallics porous materials Kirkendall effect corrosion resistance in KOH solution |
| 本文献已被 CNKI 等数据库收录！ |
