| 贴标机取标凸轮曲线的设计研究 |
| |
| 引用本文： | 刘敏杰.贴标机取标凸轮曲线的设计研究[J].轻工机械,2004(4):41-44. |
| |
| 作者姓名： | 刘敏杰 |
| |
| 作者单位： | 青岛建筑工程学院机电工程学院,山东,青岛,266033 |
| |
| 摘 要： | 对粘贴啤酒瓶标签用的回转式贴标机进行了取标凸轮曲线的设计研究。首先，对贴标机取标过程进行了工位分析，并对各工位曲线段进行了设计；其次，对工位间的过渡曲线段进行了设计；最后，根据实际数据进行计算．得到了所需曲线。
|
| 关 键 词： | 贴标机 工位 凸轮曲线 设计研究 标签 粘贴 过渡曲线 回转式 |
| 文章编号： | 1005-2895(2004)04-0041-04 |
| 修稿时间： | 2004年5月28日 |
The Design and Research for the Curve of the Picking-up Cam of Labeling Machine |
| |
| LIU Min-jie.The Design and Research for the Curve of the Picking-up Cam of Labeling Machine[J].Light Industry Machinery,2004(4):41-44. |
| |
| Authors: | LIU Min-jie |
| |
| Abstract: | In this paper, the design for the curve of the picking-up cam is given, on the basis of round labeling machine for pasting the label of beer bottle. Firstly, this paper analyses the three work-places of picking-up process, and designs the curves of every work-place; secondly the author designs the connection curves between every two work-places; finally, based on actual data, computers gain the required curve. |
| |
| Keywords: | labeling machine the curve of the picking-up cam work-place analysis design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
