基于Pro/E的内侧抽芯电池盖注射模设计 |
| |
引用本文: | 刘磊,张丽琴,吴建.基于Pro/E的内侧抽芯电池盖注射模设计[J].模具制造,2013(12):59-63. |
| |
作者姓名: | 刘磊 张丽琴 吴建 |
| |
作者单位: | [1]南昌大学共青学院工程技术系,江西九江332020 [2]芜湖职业技术学院机械工程系,安徽芜湖241000 |
| |
摘 要: | 在分析电池盖结构工艺性的基础上,用Pro/E对模具结构进行设计。探索了在Pro/E中构建复杂分型面的方法及分型面设计要点。为成型塑件内部两个相对的倒扣,设计了三种内侧抽芯机构,通过比较分析其各自的特点,最终选择斜T形槽式机构,介绍了该机构的工作过程及设计注意事项。结果表明,此内侧抽芯机构运行平稳可靠,抽芯顺利。
|
关 键 词: | 注射模 内侧抽芯 Pro E 分型面设计 斜T形槽 |
Design of Injection Mold for Battery Cover with Internal Core-Pulling Based on Pro/E |
| |
Abstract: | The structure and manufacturability of battery cover are analyzed, author uses Pro/E to design mold. It explores design methods and essentials of complex parting surface based on Pro/E. author designs three internal core-pulling mechanism as the molding of two relative buckle in the back of battery cover, through the analysis of their respective characteristics, internal core-pulling mechanism with oblique T-groove is selected and the working principles and matters needing attention of mechanism is introduced, the results show that the core-pulling mechanism have reliable operation. |
| |
Keywords: | injection mold internal core-pulling Pro/E design of parting surface T-groove |
本文献已被 CNKI 维普 等数据库收录! |