| 不锈钢电热咖啡壶把手孔冲孔模设计 |
| |
| 引用本文： | 周小敏.不锈钢电热咖啡壶把手孔冲孔模设计[J].模具工业,2004(1):27-28. |
| |
| 作者姓名： | 周小敏 |
| |
| 作者单位： | 九洲霸电器有限公司,浙江台州,318054 |
| |
| 摘 要： | 以不锈钢电热咖啡壶把手零件为例,介绍了原冲孔工艺及模具结构,经分析,改进了冲孔工艺及模具结构,阐述了冲孔模结构及工作过程。
|
| 关 键 词： | 电热咖啡壶 冲孔 模具 |
| 文章编号： | 1001-2168(2004)01-0027-02 |
| 修稿时间： | 2003年7月10日 |
Design of the Die for Piercing the Handle Hole of the Stainless-Steel Electroheat Coffeepot |
| |
| ZHOU Xiao-min.Design of the Die for Piercing the Handle Hole of the Stainless-Steel Electroheat Coffeepot[J].Die & Mould Industry,2004(1):27-28. |
| |
| Authors: | ZHOU Xiao-min |
| |
| Abstract: | The former hole-piercing process and die for making the hole of the handle of the stainˉless-steel electroheat coffeepot are introduced.Through an analysis of the part,an improvement has been made on the piercing process and the die structure.The improved structure and the working process of the piercing die are stated. |
| |
| Keywords: | electroheat coffeepot hole piercing die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
