Monte Carlo simulation of a research reactor with nominal power of 7 MW to design new control safety rods |
| |
Authors: | MK Shoushtari SM Sadat Kiai H Ghaforian |
| |
Affiliation: | a Faculty of Science, University of Zanjan, Zanjan, P.O. Box 451-313, Iran b Nuclear Science and Technology Research Institute (NSTR), Nuclear Science Research, A.E.O.I., P.O. Box 14155-1339, Tehran, Iran c Faculty of Science and Technology of Marine, Tehran, Iran |
| |
Abstract: | The Monte Carlo simulation has been established for a research reactor with nominal power of 7 MW. A detailed model of the reactor core was employed including standard and control fuel elements, reflectors, irradiation channels, control rods, reactor pool and thermal column. The following physical parameters of reactor core were calculated for the present LEU core: core reactivity (ρ), control rod (CR) worth, thermal and epithermal neutron flux distributions, shutdown margin and delayed neutron fraction. Reduction of unfavorable effects of blockage probability of control safety rod (CSR)s in their interiors because of not enough space in their sites, and lack of suitable capabilities to fabricate very thin plates for CSR cladding, is the main aim of the present study. Making the absorber rod thinner and CSR cladding thicker by introducing a better blackness absorbing material and a new stainless steel alloy, respectively, are two studied ways to reduce the effects of mentioned problems. |
| |
Keywords: | Research reactor Monte Carlo simulation MCNP Control safety rod |
本文献已被 ScienceDirect 等数据库收录! |
|