| 小长径比药盘钢模压制成型工艺研究 |
| |
| 引用本文： | 廖政权,胡焕性. 小长径比药盘钢模压制成型工艺研究[J]. 火炸药学报, 1997, 0(1) |
| |
| 作者姓名： | 廖政权 胡焕性 |
| |
| 作者单位： | 西安近代化学研究所 |
| |
| 摘 要： | 通过对炸药压装成型过程的深入分析，揭示了钢模压制小长径比药盘的技术关键是必须使所装填的散粒体炸药在压件的横断面上全面实现其质量的合理分配，设计定程式双向钢质压模，合理确定垫圈厚度和括药器结构。
|
| 关 键 词： | 药盘 长径比 钢模压制 密度 垫圈 括药器 |
Research about Press Shaping Process of a Charge Disc with Small Ratio of Length to Radius |
| |
| Liao Zhengquan Hu Huangxing. Research about Press Shaping Process of a Charge Disc with Small Ratio of Length to Radius[J]. Chinese Journal of Explosives & Propellants, 1997, 0(1) |
| |
| Authors: | Liao Zhengquan Hu Huangxing |
| |
| Abstract: | This paper reveals that the key technical condition of pressing the charge disc with small ratio of length to radius by a steel die is to realize the reasonable dispersion of moulding powder charged on the cross section of the disc. The problem can be solved to design a bidirectional steel die with fixed travel ,and to get a resonable washer thickness and a good scraper structure. |
| |
| Keywords: | Charge disc with small ratio of length to ratius Press shaping with a steel die Uniformity of density Washer thiekness Scraper structure |
| 本文献已被 CNKI 等数据库收录！ |
