首页 | 本学科首页   官方微博 | 高级检索  
     

轴向正压力作用下新型触觉复合材料电阻机械效应研究
引用本文:彭定军,刘靖,韩静涛. 轴向正压力作用下新型触觉复合材料电阻机械效应研究[J]. 塑性工程学报, 2006, 13(3): 92-96
作者姓名:彭定军  刘靖  韩静涛
作者单位:北京科技大学,材料科学与工程学院,北京,100083
摘    要:制备了一种纳米级导电炭黑填充热塑性弹性体的触觉敏感复合材料,并在MTS810材料万能试验机上对复合材料的力学性能和电学性能进行了同步测定。主要讨论了不同轴向加载速率对复合体系电阻机械效应的影响。结果表明,在0MPa~2.5MPa压力范围内,复合材料的压力-电阻拟合曲线接近线性;当轴向加载速率从0.25N/s增加到1.0N/s后,材料的压力-电阻拟合曲线的线性度有了一定程度的改善。

关 键 词:电阻机械效应  压阻特性  触觉  热塑性弹性体  加载速率
文章编号:1007-2012(2006)03-0092-05
收稿时间:2005-07-08
修稿时间:2005-09-25

Research on REM of a novel CB/TPE matrix tactile composite under uniaxial compressive stress
PENG Ding-jun,LIU Jing,HAN Jing-tao. Research on REM of a novel CB/TPE matrix tactile composite under uniaxial compressive stress[J]. Journal of Plasticity Engineering, 2006, 13(3): 92-96
Authors:PENG Ding-jun  LIU Jing  HAN Jing-tao
Affiliation:School of materials Science and Engineering, USTB Beijing 100083 China
Abstract:A nano-sized CB/TPE matrix tactile composite has been fabricated,and its mechanics and electrics properties have been simultaneously measured.Effect of different uniaxial compressive stress on REM has been especially discussed.The results showed that the pressure-resistivity regressive curve was linear closely under the pressure range from 0 to 2.5MPa.The linearity of the pressure-resistivity regressive curve was improved when loading velocity has been increased from 0.25 to 1.0N/s.
Keywords:resistance-mechanicals effect  piezoresistivity  tactile  thermoplastic elastomer  loading velocity
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号