| HIPS和PE-LD阴燃特性的研究 |
| |
| 引用本文： | 黄青松 张军 杨蕾 王立春. HIPS和PE-LD阴燃特性的研究[J]. 中国塑料, 2005, 19(10): 83-86 |
| |
| 作者姓名： | 黄青松 张军 杨蕾 王立春 |
| |
| 作者单位： | 青岛科技大学教育部橡塑工程重点实验室，青岛科技大学教育部橡塑工程重点实验室，青岛科技大学教育部橡塑工程重点实验室，青岛科技大学教育部橡塑工程重点实验室 山东 青岛 266042，山东 青岛 266042，山东 青岛 266042，山东 青岛 266042 |
| |
| 摘 要： | 采用锥形量热仪研究了金属化合物、还原性物质等添加剂对HIPS及PE-LD阴燃特性的影响,以及炭黑等填料在阴燃中的作用,并且对阴燃机理作了初步探索。结果表明:常用金属氧化物氧化铁、氧化钙、氧化锌以及氯化铜可以提高炭层活性,能够明显促进HIPS及PE-LD阴燃燃烧;氧化铝、氧化镁、氧化钼降低炭层活性减缓阴燃燃烧; 炭黑为阴燃提供燃料促进阴燃燃烧;阴燃燃烧过程是一个氧气扩散过程,减少阴燃前沿的氧气供应,可以起到抑制阴燃的作用。
|
| 关 键 词： | 阴燃 金属化合物 还原性物质 高抗冲聚苯乙烯 低密度聚乙烯 |
| 文章编号： | 1001-9278（2005）10-0083-04 |
| 收稿时间： | 2005-06-05 |
| 修稿时间： | 2005-06-05 |
Study on Influence of Metal Compounds and Reductive Substance on Afterglowing Characteristic of HIPS and PE-LD |
| |
| HUANG Qing-song, ZHANG Jun, YANG Lei, WANG. Study on Influence of Metal Compounds and Reductive Substance on Afterglowing Characteristic of HIPS and PE-LD[J]. China Plastics, 2005, 19(10): 83-86 |
| |
| Authors: | HUANG Qing-song ZHANG Jun YANG Lei WANG |
| |
| Affiliation: | Key laboratory of Rubber-Plastics, Ministry of Education, Qingdao University of Science and Technology, Qingdao 266042, China |
| |
| Abstract: | The effect of metal compounds and carbon black on the afterglowing characteristic of HIPS and PE-LD was studied, the possible mechanism of afterglowing was explored. The cone calorimeter was adopted to assess the combustion characteristic of afterglowing. It was found that the commonly used metal compounds such as Fe2O3, CaO, ZnO and CuCl2 increased the reactivity of char residues, and accelerated afterglowing combustion significantly. Al2O3, MgO and MoO3 inhibited the afterglowing. Carbon black promoted afterglowing combustion by acting as fuel. Afterglowing combustion was considered being controlled by oxygen diffusion, and it can be inhibited by reducing the oxygen supply at the front. |
| |
| Keywords: | afterglowing metal compound reductive substance high impact polystyrene low density polyethylene |
| 本文献已被 CNKI 维普 等数据库收录！ |
