| 前隔板侧板多工位级进模设计 |
| |
| 引用本文： | 向小汉.前隔板侧板多工位级进模设计[J].模具工业,2012,38(10):28-33. |
| |
| 作者姓名： | 向小汉 |
| |
| 作者单位： | 柳州职业技术学院机电工程系,广西柳州,545006 |
| |
| 基金项目： | 2012年度“广西高校优秀人才资助计划”项目. |
| |
| 摘 要： | 分析了前隔板侧板的冲压工艺,详细介绍了零件排样设计,阐述了模具整体结构及其关键零件设计和模具制造工艺。实践证明,模具结构合理,生产的零件质量合格,对类似零件的多工位级进模设计有一定参考价值。
|
| 关 键 词： | 级进模 前隔板侧板 工艺分析 排样 回弹 |
Progressive die for side plate of front separator |
| |
| XIANG Xiao-han.Progressive die for side plate of front separator[J].Die & Mould Industry,2012,38(10):28-33. |
| |
| Authors: | XIANG Xiao-han |
| |
| Affiliation: | XIANG Xiao-han (Department of Mechatronic Engineering, Liuzhou Vocational ＆ Technical College, Liuzhou, Guangxi 545006, China) |
| |
| Abstract: | The stamping process of the side plate of a front separator was analyzed; and the layout design was presented in detail. The design of the die structure, key parts and manufacturing process were then stated. |
| |
| Keywords: | progressive die side plate of front separator process analysis layout springback |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
