| 潜水泵电机壳体注射模设计 |
| |
| 引用本文： | 何冰强,廖春玲,肖国权.潜水泵电机壳体注射模设计[J].模具工业,2012,38(9):40-45. |
| |
| 作者姓名： | 何冰强 廖春玲 肖国权 |
| |
| 作者单位： | 1. 广东机电职业技术学院,广东广州,510515
2. 华南理工大学,广东广州,510640 |
| |
| 基金项目： | 中央高校基本科研业务费专项资金资助（2011ZM0060） |
| |
| 摘 要： | 分析了潜水泵电机壳体塑件的结构与成型工艺,针对圆筒形塑件上相互垂直侧孔的成型,在模具上设计了3个侧向分型机构的方案,采用了减少零件间磨损和确保开合模行程的结构,介绍了模具浇注系统、主要成型零件、侧向分型抽芯机构的设计。实践表明:模具结构紧凑、动作可靠,设计方案合理。
|
| 关 键 词： | 电机壳体 注射模 侧向分型 优化设计 |
Injection mould for submersible pump motor casing |
| |
| HE Bing-qiang
,
LIAO Chun-ling
,
XIAO Guo-Quan.Injection mould for submersible pump motor casing[J].Die & Mould Industry,2012,38(9):40-45. |
| |
| Authors: | HE Bing-qiang LIAO Chun-ling XIAO Guo-Quan |
| |
| Affiliation: | 1.Guangdong Jidian Polytechnic, Guangzhou, Guangdong 510515, China; 2. South China University of Technology, Guangzhou, Guangdong 510641, China) |
| |
| Abstract: | Based on analysis of the structure and molding process of a submersible pump motor case, an injection mould with side parting mechanism was designed to forming the orthogonal side holes in the cylindrical case. The runner system, main molding parts and side-parting core-pulling mechanism were then presented. |
| |
| Keywords: | motor case injection mould side parting optimization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
