| 采用USB2.0接口的新型炉具性能测试平台的设计 |
| |
| 引用本文： | 田升平,毛乐山,史长虹. 采用USB2.0接口的新型炉具性能测试平台的设计[J]. 计算机测量与控制, 2010, 18(1) |
| |
| 作者姓名： | 田升平 毛乐山 史长虹 |
| |
| 作者单位： | 1. 清华大学深圳研究生院,深圳,518055
2. 解放军总后勤部军需装备研究所,北京,100010 |
| |
| 摘 要： | 介绍了一种全新的以USB2.0接口芯片为通讯手段,采用ATmega2560高性能单片机为处理核心的炉具性能测试平台的设计和构成;阐述了炉具性能分析评价的新方法及其硬件和固件的实现;给出了USB设备驱动程序和上位机处理程序的设计思路;经验证,本平台具有通讯稳定快速、操作简单和成本低廉等特点,测试方法准确可靠,满足炉具测试的现场要求。
|
| 关 键 词： | USB 炉具 固件 驱动程序 平台 |
Design of New Type Stove Performance Test Platform Based on USB2. 0 |
| |
| Tian Shengping,Mao Leshan,Shi Changhong. Design of New Type Stove Performance Test Platform Based on USB2. 0[J]. Computer Measurement & Control, 2010, 18(1) |
| |
| Authors: | Tian Shengping Mao Leshan Shi Changhong |
| |
| Affiliation: | 1.Graduate School at Shenzhen/a>;Tsinghua University/a>;Shenzhen 518055/a>;China/a>;2.Quartermaster Institute/a>;General Logistics Department of P.L.A/a>;Beijing 100010/a>;China |
| |
| Abstract: | This Paper presents the design principle and structure of a new stove performance test platform,which introduces USB2.0 chip as communication means and ATmega2560 Single-chip as process core.A new method of stove performance analysis and the implementation of the hardware and firmware of the stove test platform are discussed.Design methods of the USB device driver and PC process program are described.The test platform meets the requirement of stove performance test with the characteristics of stable and fas... |
| |
| Keywords: | USB stove firmware driver platform |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
