Experimental characterization and numerical modeling of a micro-syringe deposition system for dispensing sacrificial photopolymers on particulate ceramic substrates

This work addresses the characterization of a UV-based micro-syringe deposition (μSD) system utilized in the micro-dispensing of photopolymers on particulate ceramic substrates. This methodology is used in embedding functionally graded and interconnected micro-features within constructs produced by a novel combined powder-based additive manufacturing (AM) and UV-based micro-syringe deposition (μSD) technique. The process is experimentally characterized using SEM and optical microscopy to study the effect of a wide range of process parameters on the geometrical quality of deposited tracks. Experimental data show that the system can produce features ranging from 200 to 575 μm in width and from 20 to 200 μm in height on particulate ceramic surfaces. To gain insight into the proposed micro-deposition process, a two-tier model is also developed. The first framework describes an analytical model for predicting the flow rate of the dispensed photopolymer fluid based on the piston displacement. The second model is a stochastic framework for predicting the line width of the features deposited on the substrate using a Monte Carlo probabilistic simulation to compensate for uncertainty in the system input parameters. A comparison between experimental and modeling line width predictions shows that the modeling results are 14–38% higher than the experimental results, depending on the system input variables. The proposed model is enhanced by introducing adjustment factors to compensate for UV exposure delay, fluid migration, and imbibition.