| 基于CAE软件的液晶电视前面框翘曲变形诊断分析 |
| |
| 引用本文： | 于盛睿,冯浩,罗贤海,吴泊良. 基于CAE软件的液晶电视前面框翘曲变形诊断分析[J]. 塑料科技, 2010, 38(4): 81-83 |
| |
| 作者姓名： | 于盛睿 冯浩 罗贤海 吴泊良 |
| |
| 作者单位： | 景德镇陶瓷学院机电工程学院,江西,景德镇,333000;南宁职业技术学院,广西,南宁,530003 |
| |
| 基金项目： | 江西省自然科学基金项目 |
| |
| 摘 要： | 针对液晶电视前面框在生产实际中出现的翘曲变形问题,采用CAE分析软件进行计算机数值模拟,分析冷却温度、分子取向、收缩率等对翘曲变形的影响,提出了针对性的模具优化方案。利用优化方案改进的模具进行注塑生产,得到了合格塑件,说明CAE技术在注塑模具优化设计中的可靠性与实用性。
|
| 关 键 词： | 注塑成型 翘曲变形 CAE分析 优化 |
Analysis on Warpage Defect of Front Shell of LCD Television Based on CAE Software |
| |
| Yu Shengrui,Feng Hao,Luo Xianhai,Wu Boliang. Analysis on Warpage Defect of Front Shell of LCD Television Based on CAE Software[J]. Plastics Science and Technology, 2010, 38(4): 81-83 |
| |
| Authors: | Yu Shengrui Feng Hao Luo Xianhai Wu Boliang |
| |
| Affiliation: | Yu Shengrui1,Feng Hao1,Luo Xianhai1,Wu Boliang21 School of Mechanical , Electronic Engineering,Jingdezhen Ceramic Institute,Jingdezhen 333000,China 2 Nanning College for Vocational Technology,Nanning 530003,China |
| |
| Abstract: | In order to minimize the warpage of front shell of LCD television during production, the computer numerical simulation was performed by CAE software. The effects of cooling temperature, molecular orientation, shrinkage ratio on warpage of the moulded part were analyzed, and the optimized mould scheme was presented. The eligible moulded parts were obtained by the optimized mould, which proved the reliability and practicability of CAE technology in optimization design for injection mould. |
| |
| Keywords: | Injection moulding Warpage CAE analysis Optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
