Biodegradation and effect of formaldehyde and phenol on the denitrification process |
| |
Authors: | Eiroa M Vilar A Amor L Kennes C Veiga M C |
| |
Affiliation: | Chemical Engineering Laboratory, Faculty of Sciences, University of A Coru?a, Rúa Alejandro de la Sota no. 1, 15008-A Coru?a, Spain. |
| |
Abstract: | Formaldehyde and phenol biodegradation during the denitrification process was studied at lab-scale, first in anoxic batch assays and then in a continuous anoxic reactor. The biodegradation of formaldehyde (260 mgl(-1)) as single carbon source and at phenol concentrations ranging from 30 to 580 mgl(-1) was investigated in batch assays, obtaining an initial biodegradation rate around 0.5g CH(2)OgVSS(-1)d(-1). With regard to phenol, its complete biodegradation was only observed at initial concentrations of 30 and 180 mgl(-1). The denitrification process was inhibited at phenol concentrations higher than 360 mgl(-1). Studies were also done using a continuous anoxic upflow sludge blanket reactor in which formaldehyde removal efficiencies above 99.5% were obtained at all the applied formaldehyde loading rates, between 0.89 and 0.14g COD (CH(2)O)l(-1)d(-1). The phenol loading rate was increased from 0.03 to 1.3g COD (C(6)H(6)O)l(-1)d(-1). Phenol removal efficiencies above 90.6% were obtained at phenol concentrations in the influent between 27 and 755 mgl(-1). However, when the phenol concentration was increased to 1010 mgl(-1), its removal efficiency decreased. Denitrification percentages around 98.4% were obtained with phenol concentrations in the influent up to 755 mgl(-1). After increasing phenol concentration to 1010 mgl(-1), the denitrification percentage decreased because of the inhibition caused by phenol. |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|