Comparative study of lithium ion conductors in the system Li1+xAlxA2−x (PO4)3 with A=Ti or Ge and 0≤x≤0·7 for use as Li sensitive membranes

Preparations and physico-chemical characterizations of NASICON-type compounds in the system Li_1+xAl_xA_2−x^IV(PO₄)₃ (A^IV=Ti or Ge) are described. Ceramics have been fabricated by sol-gel and co-grinding processes for use as ionosensitive membrane for Li⁺ selective electrodes. The structural and electrical characteristics of the pellets have been examined. Solid solutions are obtained with Al/Ti and Al/Ge substitutions in the range 0≤x≤0·6. A minimum of the rhombohedral c parameter appears for x about 0·1 for both solutions. The grain ionic conductivity has been characterized only in the case of Ge-based compounds. It is related to the carrier concentration and the structural properties of the NASICON covalent skeleton. The results confirm that the Ti-based framework is more calibrated to Li⁺ migration than the Ge-based one. A grain conductivity of 10⁻³ S cm⁻¹ is obtained at 25°C in the case of Li_1·3Al_0·3Ti_1·7(PO₄)₃. A total conductivity of about 6×10⁻⁵ S cm⁻¹ is measured on sintered pellets because of grain boundary effects. The use of such ceramics in ISE devices has shown that the most confined unit cell (i.e. in Ge-based materials) is more appropriate for selectivity effect, although it is less conductive.©