首页 | 本学科首页   官方微博 | 高级检索  
     

高强度材料在超深井钻机井架底座中的应用
引用本文:徐晓鹏,黄悦华,李治平,李厚岭,郑钟,Xu Xiaopeng,Huang Yuehua,Li Zhiping.高强度材料在超深井钻机井架底座中的应用[J].石油机械,2009,37(8).
作者姓名:徐晓鹏  黄悦华  李治平  李厚岭  郑钟  Xu Xiaopeng  Huang Yuehua  Li Zhiping
作者单位:1. 宝鸡石油机械有限责任公司
2. 川庆钻探工程有限公司装备处
基金项目:国家"十一五"863计划重大项目"万米深井钻探装备研制"(2006AA06A110)的部分研究内容 
摘    要:超深井钻机井架底座在结构形式、构件布局、主体材料的选取等方面均有较高要求,常规的井架、底座主体材料难以满足超深井钻机特定的载荷和工况要求。通过对超深井钻机井架底座的结构分析、高强度材料的性能分析与对比以及井架底座有限元强度分析,最终选择具有高强度、高冲击韧性和良好焊接性的低合金高强度结构钢Q420E作为超深井钻机井架底座主体材料,并总结出高强度材料对超深井钻机井架底座结构性能的影响以及高强度材料的应用原则。

关 键 词:超深井  钻机  井架底座  高强度材料  有限元分析

Application of the high tensile material to the substructure of the super-deep well's rig derrick
Abstract:There is a high requirement for the derrick substructure of the ultra-deep well in structural form,layout of component parts and main materials. The ordinary derrick and main materials for the substructure cannot meet the needs of the special loading and operating conditions of the super-deep well's drilling rig. Through structural analysis of the well's derrick substructure,performance analysis and comparison of the high tensile material and finite element analysis of the strength of the substructure,the low alloy steel labeled Q420E,which has a high tensile structure,high impact toughness and good weldability,has finally been chosen as the main material for the well's derrick substructure,summarizing the effect of the high tensile material on the structural performance of the well's derrick substructure and the principle for applying the material.
Keywords:super-deep well  drilling rig  derrick substructure  high tensile material  finite element analysis
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号