首页 | 本学科首页   官方微博 | 高级检索  
     

基于压电变压器的小型化开关功率放大器研究
引用本文:段丽玮,徐志伟,黄雪峰. 基于压电变压器的小型化开关功率放大器研究[J]. 压电与声光, 2007, 29(6): 644-647,652
作者姓名:段丽玮  徐志伟  黄雪峰
作者单位:1. 南京航空航天大学,机电学院,江苏,南京,210016
2. 南京航空航天大学,智能材料与结构重点实验室,江苏,南京,210016
基金项目:国家自然科学基金;南京航空航天大学校科研和教改项目
摘    要:首先基于压电陶瓷变压器(PT)设计了一种用于驱动压电材料作动器的功率放大器,该放大器具有效率高,体积小,质量轻等优点,与DSP控制系统相结合,实现了振动主动控制系统的小型化和集成化。然后以典型的悬臂梁结构为控制对象,选用PZT作为传感器和驱动器,实现了对模型1阶弯曲模态的主动控制。通过实验,验证了所设计的开关功率放大器的可行性。

关 键 词:压电变压器  开关功率放大器  振动主动控制
文章编号:1004-2474(2007)06-0644-04
收稿时间:2007-05-14
修稿时间:2007-05-14

Research on Miniaturization of Switch Power Amplifier Based on PT
DUAN Li-wei,XU Zhi-wei,HUANG Xue-feng. Research on Miniaturization of Switch Power Amplifier Based on PT[J]. Piezoelectrics & Acoustooptics, 2007, 29(6): 644-647,652
Authors:DUAN Li-wei  XU Zhi-wei  HUANG Xue-feng
Abstract:In this paper,a power amplifier based on piezoelectric transformer is designed to drive piezoelectric-material actuator.It has many special characteristics such as high efficiency,small volume,low weight and so on.Integrated with the DSP control system,the miniaturization and integration of active vibration control system can be achieved.In order to testify the system,the cantilever beam is selected as research object and PZT are chosen as actuators and sensors.The first bend mode vibration of the beam is controlled successfully.According to the experimental results,the feasibility and reliability of the power amplification device are verified.
Keywords:piezoelectric transformer  switch power amplifier  active vibration control
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号