FATIGUE CRACK GROWTH AND CLOSURE AT HIGH STRESS RATIOS

Abstract— Fatigue crack growth tests have been carried out on a medium carbon structural steel over a wide range of stress ratios, i.e. from 0 to 0.7. All tests were conducted under constant amplitude loading conditions corresponding to growth rates in the Paris regime. Crack closure behaviour was observed experimentally by a surface strain gauge technique, and numerically by a finite element analysis under plane stress condition. While the crack closure could not be detected by experimental measurements at stress ratios equal to or greater than 0.5, the numerical results showed that closure occurred even at high stress ratios up to 0.7. The differences between experimentally and numerically determined crack opening levels were found for each stress ratio. A cause for these differences is discussed. In addition, two new types of crack tip parameters which have been proposed recently are evaluated by finite element analysis and their relevance to fatigue crack growth are discussed. It is concluded that fatigue crack growth rates are substantially determined by the effective stress intensity factor range which is based on the crack closure concept.