|
|||||
|
|
| 铸旋轮毂热旋压过程的数值模拟及工艺优化 | |
| 引用本文： | 何维均,宋鸿武,常海平,李昌海,张士宏. 铸旋轮毂热旋压过程的数值模拟及工艺优化[J]. 精密成形工程, 2011, 3(2): 6-10 |
| 作者姓名： | 何维均 宋鸿武 常海平 李昌海 张士宏 |
| 作者单位： | 1. 中国科学院金属研究所,沈阳,110016 2. 中国科学院金属研究所,沈阳,110016;中信戴卡轮毂制造股份有限公司,河北,秦皇岛,066003 3. 中信戴卡轮毂制造股份有限公司,河北,秦皇岛,066003 |
| 摘 要： | 为了优化铸旋铝合金轮毂的生产工艺,基于旋压变形的特点,建立了铸旋铝合金轮毂三旋轮热旋压复杂过程的三维有限元模型.采用所建立的有限元模型对实际的A356合金轮毂铸坯热旋压过程进行了数值模拟,对旋压载荷进行了分析,为旋压设备的选择和模具设计提供了依据;同时研究了铸坯开口角和旋轮轨迹分别对轮辋和内轮缘处应变分布的影响规律,获... |
| 关 键 词： | 铝合金轮毂 热旋压工艺 数值模拟 开口角 旋轮轨迹 |
| 收稿时间： | 2010-12-06 |
| 修稿时间： | 2011-03-10 |
Numerical Simulation and Process Optimization of Hot Spinning Process for Cast-spinning Wheel |
|
| HE Wei-jun,SONG Hong-wu,CHANG Hai-ping,LI Chang-hai and ZHANG Shi-hong. Numerical Simulation and Process Optimization of Hot Spinning Process for Cast-spinning Wheel[J]. Journal of Netshape Forming Engineering, 2011, 3(2): 6-10 | |
| Authors: | HE Wei-jun SONG Hong-wu CHANG Hai-ping LI Chang-hai ZHANG Shi-hong |
| Affiliation: | 1(1.Institute of Metal Research Chinese Academy of Sciences,Shenyang 110016,China;2.Citic Dicastal Wheel Manufacture Co.,Ltd.,Qinhuangdao 066003,China) |
| Abstract: | A FEM model for hot spinning process of cast-spinning aluminum alloy wheel was built, so as to optimize the corresponding process parameters. The load on spinning wheels during spinning was analyzed, which can be the theoretical guidance for selecting proper spinning machine. And the effects of open-angel of the cast billet and the route path of the spinning wheels on strain distribution are then discussed. The results show that the optimal open-angel is 18° and proper change of spinning path can improve the deformation at the inner flange. |
| Keywords: | A356 alloy wheel hot spinning processing numeral simulation open-angle spinning path |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《精密成形工程》浏览原始摘要信息 | |
| 点击此处可从《精密成形工程》下载免费的PDF全文 | |