| 不锈钢管冷旋压成形试验 |
| |
| 引用本文： | 王宾,秦建平,王福利,李鸿斌. 不锈钢管冷旋压成形试验[J]. 精密成形工程, 2011, 3(3): 5-9 |
| |
| 作者姓名： | 王宾 秦建平 王福利 李鸿斌 |
| |
| 作者单位： | 1. 太原科技大学,材料科学与工程学院,太原,030024
2. 山西北方惠丰机电有限公司,山西,长治,046012 |
| |
| 基金项目： | 太原市大学生创新创业专项 |
| |
| 摘 要： | 介绍了3种奥氏体不锈钢材料的特性,主要旋压工艺参数对旋压成形的影响.在不同工艺参数下,采用三旋轮错距、无中间退火、直接强力冷旋压工艺,对3种奥氏体不锈钢管材料进行反旋压成形,分析了不同参数下奥氏体不锈钢管旋压成形的特点,提出了针对3种奥氏体不锈钢管冷旋压的合理工艺参数.
|
| 关 键 词： | 工艺参数 奥氏体不锈钢管 冷旋压 |
| 收稿时间： | 2010-12-24 |
| 修稿时间： | 2011-05-10 |
The Research of Cold Spinning Forming of Stainless Steel Pipes |
| |
| WANG Bin,QIN Jian-ping,WANG Fu-li and LI Hong-bin. The Research of Cold Spinning Forming of Stainless Steel Pipes[J]. Journal of Netshape Forming Engineering, 2011, 3(3): 5-9 |
| |
| Authors: | WANG Bin QIN Jian-ping WANG Fu-li LI Hong-bin |
| |
| Affiliation: | 1.College of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China;2.Shanxi North Huifeng Mechanical Electronical CO.,LTD.,Changzhi 046012,China) |
| |
| Abstract: | The paper presents material properties of three austenitic stainless steel and influences of main spinning technological parameters on spinning forming. Three kinds of austenitic stainless steel pipe were backward spinned with spinning process of three wheels stagger, without intermediate annealing, direct cold spinning in different technological parameters. It analyses characters of spinning forming of austenitic stainless steel pipe in different technological parameters, it puts forwards reasonable technological parameters to cold spinning of three kinds of austenitic stainless steel pipe. |
| |
| Keywords: | technological parameter austenitic stainless steel pipe cold spinning |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载免费的PDF全文 |
|
