首页 | 本学科首页   官方微博 | 高级检索  
     

大型压力容器现场热处理技术
引用本文:卫建良,马向阳,杨森,焦玉瑞,贾利.大型压力容器现场热处理技术[J].石油工程建设,2003,29(5):13-17.
作者姓名:卫建良  马向阳  杨森  焦玉瑞  贾利
作者单位:1. 中国石油天然气第一建设公司,河南洛阳 471023
2. 中油股份大连石化分公司,辽宁大连 116032
基金项目:中国石油天然气第一建设公司重点项目(编号CTFCC2002~001)
摘    要:以大连石化350万t/a催化裂化装置再生器为例,研究开发大型炼油化工设备现场新型热处理工艺。通过设置必要的热气流导向装置,采用微正压内燃工艺,配备新型大功率燃油喷嘴、用DCS集散控制系统调节油风比例和烟囱热量排放张合度,对超厚壁板适当增加电加热辅助热处理,解决了大容积、变截面、不等壁厚、超重设备施工现场热处理温度调整难度大、不均衡等技术问题。实践证明,应用该技术进行热处理,具有工期短、效果好、经济效益明显等特点。

关 键 词:压力容器  再生器  热处理  技术
文章编号:1001-2206(2003)05-0013-05
修稿时间:2002年10月8日

Heat Treatment Technique on Site for Large Scale Pressure Vessel
WEI Jian - liang.Heat Treatment Technique on Site for Large Scale Pressure Vessel[J].Petroleum Engineering Construction,2003,29(5):13-17.
Authors:WEI Jian - liang
Abstract:By taking the 3. 5Mt/a catalytic cracking regenerator of Dalian Petro - Chemical Plant as an example, the research on new heat treatment process on site is conducted. The technical problem of heat treat-ment of ultra large equipment, such as difficult temperature regulation and unevenness of large volume with changed sections and changed wall thickness, are solved through setting up necessary guiding device to direct heat air current, adopting slight positive pressure internai combustion process, providing a new type of large power fuel spray nozzle, using distributing control system (DCS) to adjust oil - seal proportion and heat quantity exhausting opening of chimney and adding supplementary electrical heat treatment for ultra thick wall. The practice proves that the heat treatment technique has advantages of short construction period and cost - efficiency.
Keywords:pressure vessel  regenerator  heat treatment  technique
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号