| 紫铜为基材用化学复合镀法制备Ni-P-聚四氟乙烯疏水性膜 |
| |
| 引用本文： | 胡彩花,王学魁,孙之南,马若欣. 紫铜为基材用化学复合镀法制备Ni-P-聚四氟乙烯疏水性膜[J]. 化学工程, 2009, 37(1) |
| |
| 作者姓名： | 胡彩花 王学魁 孙之南 马若欣 |
| |
| 作者单位： | 天津科技大学,海洋科学与工程学院,天津,300457;天津科技大学,海洋科学与工程学院,天津,300457;天津科技大学,海洋科学与工程学院,天津,300457;天津科技大学,海洋科学与工程学院,天津,300457 |
| |
| 摘 要： | 采用化学复合镀的方法,以紫铜为基材,制备复合材料Ni-P-聚四氟乙烯(PTFE)疏水性膜;控制镀液的组成和条件,可获得具有良好疏水性的复合材料Ni-P-PTFE膜,其与蒸馏水接触角为128.6°;原子力显微镜扫描图像表明,表面微粒分布均匀,表面由许多微小的结构覆盖;XPS光电子能谱分析结果表明镀层组成Ni,P,PTFE质量分数约为52.68%。
|
| 关 键 词： | 化学复合镀 疏水性 紫铜 接触角 原子力显微镜 |
Ni-P-polytetrafluoroethylene hydrophobic film with chemical composite plating on pure copper |
| |
| HU Cai-hua,WANG Xue-kui,SUN Zhi-nan,MA Ruo-xin. Ni-P-polytetrafluoroethylene hydrophobic film with chemical composite plating on pure copper[J]. Chemical Engineering, 2009, 37(1) |
| |
| Authors: | HU Cai-hua WANG Xue-kui SUN Zhi-nan MA Ruo-xin |
| |
| Affiliation: | School of Marine Science and Engineering;Tianjin University of Science and Technology;Tianjin 300457;China |
| |
| Abstract: | Ni-P-polytetrafluoroethylene(PTFE) hydrophobic film was prepared by means of chemical composite plating on pure copper of base material.By controlling the ingredients and conditions of plating solution,the composite material Ni-P-PTFE film with good hydrophobicity was obtained.The contact angle between the material and distilled water is 128.6°.The Atomic Force Microscope(AFM) spectra indicate that the particulate distribution on film surface is uniform.XPS results show that the total mass fraction of Ni,P,PTFE is about 52.68% of film surface composition. |
| |
| Keywords: | chemical composite plating hydrophobicity pure copper contact angle Atomic Force Microscope |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
