| 液压脉振注射成型机预塑过程螺杆振动系统阻尼特性分析 |
| |
| 引用本文： | 王权,瞿金平.液压脉振注射成型机预塑过程螺杆振动系统阻尼特性分析[J].噪声与振动控制,2010,30(2):30-33. |
| |
| 作者姓名： | 王权 瞿金平 |
| |
| 作者单位： | （1.中山火炬职业技术学院，广东中山528436；2.华南理工大学聚合物新型成型装备国家工程研究中心，聚合物成型加工工程教育部重点实验室，广州510640） |
| |
| 摘 要： | 注塑机预塑过程由于聚合物熔体阻尼的存在,对新型液压脉振注射成型机螺杆振动系统的振幅产生很大影响,从而降低整机性能。依据流体动力学的剪切理论,确定预塑过程聚合物熔体的阻尼系数。结果表明,预塑过程振动系统的阻尼不仅与螺杆的几何参数和物料的性能有关,还取决于加工工艺参数(如振动强度、螺杆转速等),而螺杆转速对阻尼的影响最大。
|
| 关 键 词： | 振动与波 注射成型机 预塑 螺杆 阻尼 |
| 收稿时间： | 2009-7-17 |
Damping Analysis for Screw's Vibration System of Hydraulic Vibration Injection Molding Machine in Plasticizing Process |
| |
| WANG Quan,QU Jin-ping.Damping Analysis for Screw''s Vibration System of Hydraulic Vibration Injection Molding Machine in Plasticizing Process[J].Noise and Vibration Control,2010,30(2):30-33. |
| |
| Authors: | WANG Quan QU Jin-ping |
| |
| Affiliation: | (1. Zhongshan Torch Institute of Technology, Zhongshan Guangdong528436, China；2. South China University of Technology, Guangzhou510640, China) |
| |
| Abstract: | The vibration amplitude of novel hydraulic vibration injection molding machine is greatly influenced by the polymer fusible damping in plasticizing process.Based on the shear theory of hydrodynamics, the damping coefficient in plasticizing process is determined in this paper.The results show that the damping of the vibration system is not only related to the geometrical parameters of the screw and property of the material, but also the molding technological parameter, such as vibration intensity, screw's rotation speed, etc.And the most remarkable affect to the damping is the screw's rotation speed. |
| |
| Keywords: | vibration and wave injection molding machine plasticizing process screw damping |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《噪声与振动控制》浏览原始摘要信息 |
|
点击此处可从《噪声与振动控制》下载全文 |
