| 导电件级进模设计 |
| |
| 引用本文： | 姚明超. 导电件级进模设计[J]. 模具工业, 2003, 0(7): 22-25 |
| |
| 作者姓名： | 姚明超 |
| |
| 作者单位： | 三门峡仪电有限责任公司,河南三门峡,472000 |
| |
| 摘 要： | 通过对导电件零件的工艺分析,确定了采用级进模的工艺可行性及工艺难点,成功地设计并制造出具有多道弯曲的导电件多工位级进模
|
| 关 键 词： | 导电件 排样 弯曲 级进模 |
| 文章编号： | 1001-2168(2003)07-0022-04 |
| 修稿时间： | 2003-01-09 |
Design of Progressive Die for Conduct Piece |
| |
| YAO Ming_chao. Design of Progressive Die for Conduct Piece[J]. Die & Mould Industry, 2003, 0(7): 22-25 |
| |
| Authors: | YAO Ming_chao |
| |
| Abstract: | On the basis of the technical analysis of the conduct piece,the feasibility in the proˉcessing of the progressive die for the piece and the difficulties in processing were determined.Then a multi_position progressive die with multi_bending for the conduct piece was successfully designed and manufactured. |
| |
| Keywords: | conduct piece layout bending progressive die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
